Retaining Ring Materials retaining ring materials, carbon spring steel, stainless steel, berrylium copper, phosphor bronze, retaining rings, retaining ring, rings, ring, snap rings, snap ring, internal rings, external rings, fasteners, screws, nuts, bolts, cotter pins, washers, circlips, fixings, rotor clip, roto clip, roto-clip |
|
|
Carbon Spring Steel:This steel is known for its high strength,and reliability in retaining ring applications. Since carbon spring steel is subject to corrosion, Rotor Clip treats all such rings with a protective coating to ensure some corrosion resistance. For long-term corrosion protection, a zinc plating or non-metallic finish should be applied over the steel. |
|
Stainless Steel: PH 15-7 Mo is an extra strength corrosion-resistant steel, capable of preventing atmospheric oxidation at temperatures up to 900º F. It also offers the following advantages:1. Minimal distortion due to unique heat-treating process.2. A minimum of 225,000 psi for high ultimate tensile strength.3. High creep strength. Note: We reserve the right to substitute PH 17-7 stainless steel material for PH 15-7 Mo on larger rings. |
|
Stainless Steel Type 420:A less expensive alternative to PH 15-7. Since general corrosion resistance for this material is less than PH-15-7, use of this material depends upon the application. |
|
Berrylium Copper Alloy # 25: Applications that require conductivity are best served by this material. It is also characterized by excellent corrosion resistance and is particularly effective in sea air and seawater atmospheres. |
|
Copper Alloy C72900: A less expensive alternative to Alloy#25 offering the following characteristics:1. Excellent high temperature stress relaxation resistance. 2. High strength and excellent formability.3. Lack of distortion during aging. |
|
Phosphor Bronze Alloy #5218: The least expensive copper material Rotor Clip offers. This type exhibits higher strength compared to standard phosphor bronze materials with the same tin percentages. It is also characterized by very good stress relaxation characteristics. (Note: Rotor Clip can also supply phosphor bronze material to DIN standard 17 662, Material Number 2.1020.) |
Finishes Reference Chart |
|
